Web-Auth (Global Address Pool) - HP 530 Management Manual

Command Line Reference
Web Authentication Commands
9-80
Command
[no] web-auth default-login-page
web-auth custom-login-text [title <
text header-text
>] | [header <
footer-text
< >] | [descriptive
descriptive-text
< >]
[no] web-auth default-welcome-page
web-auth custom-welcome-text [title
title-text header-text
< >] | [header <
footer-text
[footer < >] | [descriptive
descriptive-text
< >]
[no] web-auth default-failed-page
web-auth custom-failed-text [title <
text header-text
>] | [header <
footer-text
< >] | [descriptive
descriptive-text
< >]

web-auth (Global Address Pool)

These commands enable configure the temporary pool of IP addresses used
by Web-Auth on the device. The no version of a command clears the field value.
Syntax
[no] web-auth starting-ip-address <ip-address> <subnet-mask>
[no] web-auth lease-time <lease>
ip-address - Specifies the starting IP address of the Web-Auth tempo-
•
rary address pool.
subnet-mask - Specifies the subnet mask of the Web-Auth temporary
•
address pool.
• lease - Specifies the lease, in seconds, granted to Web-Auth temporary
addresses.
Command Mode
Global Configuration
Function
Enables or disables the default
field values for the Login screen.
title-
Specifies the custom text field
>] | [footer values on the Web-Auth Login
screen.
Enables or disables the default
field values for the Welcome
screen.
Specifies the custom text field
>] | values on the Web-Auth
Welcome screen.
Enables or disables the default
field value values for the Failed
screen.
title-
Specifies the custom text fields
>] | [footer on the Web-Auth Failed screen.
Mode Page
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN