Terminal - HP 530 Management Manual

Command Line Reference
General Commands
9-16
• system-information - Show global configured and operational system
parameters on this device. See
tech - Shows status of a predefined command sequence used by
•
technical support. See
• time - Show current date and time. See
version - Show software version. See
•
wlans - Show WLANs information on this device or radio context. See
•
"show wlan" on page 9-120.
• wds - Show information about the WDS's on this device. See
wds" on page 9-162.

terminal

This command sets terminal line parameters.
Syntax
terminal length | width
• length - Set number of lines on a screen.
– <2-1000> - Number of lines on a screen.
width - Set width of display terminal.
•
– <61-1920> - Number of characters on a screen line.
Default Setting
N/A
Command Mode
Manager Exec
Example
ProCurve Access Point 530# terminal length 1000
ProCurve Access Point 530#
ProCurve Access Point 530# terminal width 1900
ProCurve Access Point 530#
"show system-information" on page 9-28.
"show tech" on page 9-57.
"show time" on page 9-36.
"show version" on page 9-30.
"show