Command Line Reference
Overview
9-8
Overview
This chapter describes the commands provided by the Access Point 530 CLI.
The CLI commands can be broken down into the functional groups shown
below.
Command Group
General
System Management
System Logging Commands
System Clock Commands
SNMP
Flash/File Commands
RADIUS Accounting/
Authentication Commands
Radius Users
MAC Address Authentication Configures MAC parameters.
Filtering Commands
Ethernet Interface Commands Configures Ethernet interface settings.
Wireless Interface
Wireless Security
Neighbor AP-Detection
Vlan Commands
QoS
WDS
STP
Description
Initial commands for performing basic access point
tasks.
Basic commands for performing basic status,
management, and performance tasks.
Commands related to event logs on the system.
Commands related to SNTP.
Commands for establishing SNMP community
settings.
Configures relating to resetting configuration and
factory files.
Configures RADIUS accounting and authentication
parameters.
Configures RADIUS users.
Configures filtering settings.
Configures wireless parameters.
Configures wireless security settings.
Configures access point detection settings.
Configures management VLAN parameters.
Configures Quality of Service parameters.
Configures WDS settings.
Configures STP parameters.
Page
9-10
9-17
9-31
9-35
9-37
9-50
9-65
9-69
9-72
9-87
9-91
9-101
9-125
9-137
9-147
9-150
9-159
9-166