HP 530 Management Manual page 165

N o t e
When the radio is configured for auto channel selection, any radio mode
changes result in a five- to ten-second delay as the optimum radio channel
is determined and selected.
■ Maximum Stations: The maximum number of stations allowed to access
the applicable radio at any one time. (The default is 256.)
[Update]: Updates the radio parameters.
■
Figure 6-2. Configuring Basic Radio Settings
To Modify Basic Radio Settings:
1. Select Network Setup > Radio.
2. Select the radio channel from the drop-down. If you are deploying access
points in the same area, see the key points summarized in section
.
view" on page 6-3
3. To set a limit on the number of stations accessing the access point, enter
a value within the applicable range in the Maximum Stations field.
4. Click .
[Update]
Wireless Interface Configuration
Configuring the Radio
"Over-
6-13