System Configuration Menu; Diagnostics Menu - HP Mini 210 Maintenance And Service Manual

System Configuration Menu

Select
Language
Fan Always On
Action Keys Mode
Boot Options

Diagnostics Menu

Select
Hard Disk Self Test (select models only)
Memory Test
78 Chapter 5 Setup Utility
To do this
Change the Setup Utility language.
Enable/disable Fan Always On. When enabled, the computer
fan will always be on (enabled by default).
Enable/disable Action Keys Mode (enabled by default).
Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the
f12 functions of Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
●
Floppy boot―Enable/disable floppy boot (disabled by
default).
●
Internal Network Adapter boot―Enable/disable boot
from Internal Network Adapter (disabled by default).
●
Boot Device Priority―Set the boot device priority for:
◦
Internal hard drive
◦
USB Diskette on Key/USB hard drive
◦
USB CD/DVD ROM drive
◦
USB floppy
◦
Network adapter
NOTE: Only the devices attached to the system
will appear in the boot order menu.
To do this
Run a comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
f10 and