Service Door - HP Mini 210 Maintenance And Service Manual

Service door

Description
Charcoal, for HP Mini 210 models
Crimson Red, for HP Mini 210 models
Glossy Black, for HP Mini 110 and Compaq CQ10 models
Luminous Rose, for HP Mini 210 models
Ocean Drive, for HP Mini 210 models
Sweet Purple, for HP Mini 210 models
Before removing the service door, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the service door:
1. Slide the battery/service door latch (1) to release the service door.
2. Slide the service door toward the front of the computer (2) and then remove the door (3).
NOTE:
some popping noises as the service door tabs disengage from the base enclosure slots.
Battery on page
It is normal for the service door to flex slightly when it is released. You may also hear
44).
Component replacement procedures
Spare part number
650727-001
650732-001
663676-001
650731-001
650728-001
654203-001
45