Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP Mini 210 Maintenance And Service Manual
Hp mini 210, hp mini 110, and compaq mini cq10
Hide thumbs
Also See for Mini 210:
- Maintenance and service manual (101 pages) ,
- Getting started (67 pages) ,
- Maintenance and service manual (114 pages)
Table of Contents
Advertisement
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
38
Chapter 4 Removal and replacement procedures
Using excessive force during disassembly and reassembly can damage plastic parts.
Hide quick links:
Advertisement
Table of Contents
