EUROPOWER PMX2000 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this device near water. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section).
It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products you’ve greatly contributed to shaping our company and making it successful.
10-channel power mixer that sets new stan- dards. Right from the start, our goal has been to design a Your EUROPOWER PMX2000 comes with ten input channels, revolutionary device that can be used for a great variety which only differ in terms of pad switch, peak LED and interface of applications.
EUROPOWER PMX2000 The stereo equalizer is effective on the main mix when 2.2 Rear panel both units have been activated with the EQ IN buttons The mains connection is on a standard IEC receptacle. An and the MODE switch is set to its upper position appropriate power cord is supplied with the unit.
Page 6
EUROPOWER PMX2000 (slow or fast) rotating speakers. Cathedral: Simulates the dense, long reverberation of a large cathedral, which is appropriate for solo instruments or vocals in slow pieces. Please choose between two variations. Delay: A delay of the input signal with various repetitions.
AC power cord. 4.3 Audio connections The in and outputs of your BEHRINGER PMX2000 are de- signed as unbalanced 1/4" mono jacks—except for the mono channel line inputs, which come as balanced 1/4" stereo jacks. Of course, all in and outputs work with both balanced and unbalanced connectors.
EUROPOWER PMX2000 ® Fig. 4.6: PMX2000 SPEAKON connector assignment 5. WIRING EXAMPLES Fig. 5.2: PMX2000 as double mono amplifier (example) For this application, however, please set the MODE switch to “MON/MAIN”! Fig. 5.1: PMX2000 as stereo amplifier (example) Please set the MODE switch to “LEFT/RIGHT”...
-72 dB / -76 dB A-weighted Main Mix @ 0 dB, BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without Channel fader @ 0 dB -71 dB / -75 dB A-weighted prior notice.
5. Any repair or opening of the unit carried out by unauthorized this warranty as described under § 3 and 4, BEHRINGER shall, at personnel (user included) will void the warranty.