Chapter 5: Maintenance and Troubleshooting
Cleaning Your Meter
Caring for your ACCU-CHEK Compact Plus meter is easy. If the display or the outside of the meter is dirty,
wipe it off with a slightly damp cloth or cotton swab. You may use water, 10% bleach solution*, 70% alcohol
(ethyl alcohol) or 70% rubbing alcohol (isopropyl alcohol).
Note:
Only open the drum door when the meter is turned off. Opening the drum door when the meter is turned on
may damage the meter.
If there is any blood in the test strip opening or if your meter displays the "E-5" message, follow these steps
to clean it:
1. With the meter off, open the drum door by lifting up on the drum door tab located to the right of the test
strip slot.
2. Gently wipe the small measurement window. You may use water, 10% bleach, 70% alcohol (ethyl alcohol)
or 70% rubbing alcohol (isopropyl alcohol). Wipe these fluids off immediately after application.
3. Close the drum door until it snaps. The meter turns on and rotates the test drum to the next available test
strip.
4. The meter turns off.
*Bleach solution must be prepared fresh the day you use it.
64