Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353.
Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. SKU 92156 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS 30 Feet (16 Ga.)
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. SKU 92156 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY...
Page 4
Reel service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. SKU 92156 For technical questions, please call 1-800-444-3353. REEL USE AND CARE...
Maintain labels and nameplates on the Cord Reel Work Light. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear ANSI approved safety impact eye goggles when installing the Cord Reel Work Light.
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A SKU 92156 For technical questions, please call 1-800-444-3353. GROUNDING WARNING!
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 92156 For technical questions, please call 1-800-444-3353. FIGURE B...
Page 8
3.5 - 5.0 5.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 FIGURE C SKU 92156 For technical questions, please call 1-800-444-3353. (120 VOLT) EXTENSION CORD LENGTH 50 FEET 75 FEET *Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
You may slide the Hook (25) along the Cord to hang the Cord, keeping it out of the way. Also, you may use the Hook (21) to hang the Cord Reel Work Light, allowing for hands free operation. See FIGURE 1.
Page 11
Gently snap the new Bulb (31) into the receptacle. See FIGURE 6. • Replace the Clear Cover (15) and the Screws (16). • FIGURE 3 FIGURE 5 Bulb Protector (27) SKU 92156 For technical questions, please call 1-800-444-3353. FIGURE 4 FIGURE 6 Receptacle Bulb (31) Page 11...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 92156 For technical questions, please call 1-800-444-3353. PARTS LIST...
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 92156 For technical questions, please call 1-800-444-3353. Page 13...