Chicago Electric 40315 Assembly And Operating Instructions Manual
Harbor freight tools assembly & operating instructions 7" tile saw chrome plated - bench top 40315
Hide thumbs
Also See for 40315:
- Set up and operating instructions manual (21 pages) ,
- Owner's manual & safety instructions (16 pages)
Table of Contents
Advertisement
Quick Links
7" TILE SAW
Chrome Plated - Bench Top
ASSEMBLY AND OPERATING INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
No portion of this manual or any artwork contained herein may be reproduced
in any shape or form without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Model 40315
TO PREVENT SERIOUS INJURY,
©
2005 by Harbor Freight Tools
Manual Revised 04/05
®
®
. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 40315
Summary of Contents for Chicago Electric 40315
- Page 1 2005 by Harbor Freight Tools No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. Model 40315 ®...
-
Page 2: Product Specifications
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. SKU 40315 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS Description 120VAC / 60Hz / 4.8 Start Up Amps... -
Page 3: Electrical Safety
Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury. SKU 40315 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY... - Page 4 Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. SKU 40315 For technical questions, please call 1-800-444-3353. TOOL USE AND CARE...
-
Page 5: Specific Safety Rules
Do not abuse the Power Cord/Plug (34). Do not pull the Power Cord to discon- nect the Plug from an electrical outlet. Do not move the Tile Saw with the Power Cord/Plug in the outlet. Keep the Power Cord/Plug away from heat, oil, sharp, edges, and its own Cutting Wheel Blade (8). - Page 6 Check Blade Guard (49) for proper up/down movement before each use. Do not operate the Tile Saw if the Blade Guard does not move freely. Make sure the Blade Guard moves freely and does not touch the Cutting Saw Blade (8) or any other part of the Tile Saw, in all angles and depths of cut.
- Page 7 Apply moderate pressure, allowing the Blade to cut without being forced. Turn off the Tile Saw and allow the Cutting Wheel Blade (8) to stop on its own if the Blade is to be backed out of an uncompleted cut.
- Page 8 Make sure to stand on a dry, insulated surface such as a rubber mat while using the Tile Saw. Never attempt to stand on the Tile Saw. Doing so may cause the Saw to tip, causing personal injury and/or property damage.
-
Page 9: Grounded Tools: Tools With Three Prong Plugs
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure B.) 3-PRONG PLUG SKU 40315 For technical questions, please call 1-800-444-3353. GROUNDING WARNING! -
Page 10: Double Insulated Tools: Tools With Two Prong Plugs
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure D.) SKU 40315 For technical questions, please call 1-800-444-3353. FIGURE C... - Page 11 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. SKU 40315 For technical questions, please call 1-800-444-3353. (120 VOLT) EXTENSION CORD LENGTH Feet...
- Page 12 When unpacking, check to make sure all the parts shown on the Parts List on page 16 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 13 To attach the Star Knob (53), place the Cutting Guide (57) on the Table (51) of the Tile Saw. Place the Clamping Plate (56) behind the edge of the Table. Insert the threaded portion of the Star Knob through the Cutting Guide and screw the Star Knob into the Clamping Plate.
- Page 14 Check to make sure the Cutting Wheel Blade (8) is picking up water from the Tray (17). If not, turn off the Tile Saw. Unplug the machine, and refill the Tray to the appropriate level. Then, restart the Tile Saw. (See Figure G.) Place the workpiece you are cutting firmly against the Cutting Guide (57), and slowly feed the workpiece into the revolving Cutting Wheel Blade (8).
-
Page 15: Inspection, Maintenance, And Cleaning
Tray (17) in the reverse order of removal. To clean: Wipe with a damp cloth, vacuum or use compressed air. Do not use solvents. When storing: Store the Tile Saw in a safe, clean, dry, location out of reach of children and other unauthorized people. CAUTION! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. -
Page 16: Please Read The Following Carefully
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE- MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. n i l t t i l SKU 40315 For technical questions, please call 1-800-444-3353. PARTS LIST c t i c t i... -
Page 17: Assembly Diagram
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 03/06 SKU 40315 For technical questions, please call 1-800-444-3353. Page 17... -
Page 18: Electrical Schematic
ELECTRICAL SCHEMATIC K=Switch / D=Motor / J=Terminal / B=Thermal Protection L1=Main Coil / L2=Sub-Coil / C=Capacitor / H=Capacitor Box SKU 40315 For technical questions, please call 1-800-444-3353. Page 18...