Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Do not abuse the Power Cord. Never use the Power Cord to carry the tool or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. SKU 93359 For technical questions, please call 1-800-444-3353 Specifications...
Many accidents are caused by poorly maintained tools. 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SKU 93359 For technical questions, please call 1-800-444-3353 Personal Safety...
Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear ANSI approved safety impact eye goggles and heavy work gloves when using the tool.
The plug and outlet should look like those in the following illustration. (See Figure A.) Figure B volt outlets shown in the following illustration. (See Figure B.) SKU 93359 For technical questions, please call 1-800-444-3353 GROUNDING DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Tools marked “Double Insulated”...
Page 7
Paint Roller Handle with Roller and Snap-on spatter shield Aluminum Extension Tube with Quick Disconnects If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. These are the main components of your Electric Paint Roller Kit.
Handle Button (24) to pump paint remaining in the tool back into the Paint Can. Stop pumping by releasing the Handle Button (24) when the paint has been pumped through and cleaning fluid starts to come out of the Roller Arm (39). SKU 93359 For technical questions, please call 1-800-444-3353 Selector Switch (02)
Page 9
If you are not using the Extension, press the tab on the Handle Connector (27) and remove the Roller Arm (39). Clean the Handle unit with a damp cloth. CAUTION: DO NOT IMMERSE THE HANDLE UNIT, AS IT WILL BE DAMAGED. SKU 93359 For technical questions, please call 1-800-444-3353 REV 02/07...
Pump operates but paint won’t flow: Check to be sure the paint is properly stirred and there are no obstructions in the Suction Tube. Check for dried paint or other obstructions clogging the tubes or pump. SKU 93359 For technical questions, please call 1-800-444-3353 Maintenance...
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93359 For technical questions, please call 1-800-444-3353 Parts List...