Table of Contents
Advertisement
ELECTRIC NAILER / STAPLER
MODEL 91494
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright
2004 by Harbor Freight Tools
. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Table of Contents
Related Manuals for Chicago Electric 91494
Summary of Contents for Chicago Electric 91494
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
-
Page 2: Product Specifications
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 91494 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS... -
Page 3: Electrical Safety
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 91494 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY... - Page 4 If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. SKU 91494 For technical questions, please call 1-800-444-3353. TOOL USE AND CARE REV 07/04...
-
Page 5: Specific Safety Rules
“live” wire will make exposed metal parts of the tool “live” and shock the operator. Maintain labels and nameplates on the Nailer / Stapler. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Nailer / Stapler. - Page 6 (GFCI) system is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock. - Properly maintain and inspect all tools before use to avoid electrical shock. SKU 91494 For technical questions, please call 1-800-444-3353. Page 6...
-
Page 7: Grounded Tools: Tools With Three Prong Plugs
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A SKU 91494 For technical questions, please call 1-800-444-3353. GROUNDING WARNING! -
Page 8: Double Insulated Tools: Tools With Two Prong Plugs
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 91494 For technical questions, please call 1-800-444-3353. EXTENSION CORDS... - Page 9 3.5 - 5.0 5.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 FIGURE C SKU 91494 For technical questions, please call 1-800-444-3353. (120 VOLT) EXTENSION CORD LENGTH 50 FEET 75 FEET *Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
- Page 10 When unpacking, check to make sure all the parts shown on the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 11 Do not force the Inner Magazine (24) or you may damage the tool. FIGURE 2 Lever (29) Inner Magazine (24) Insert staples here, crown up SKU 91494 For technical questions, please call 1-800-444-3353. FIGURE 3 Depth Adjustment Knob Lever (29)
-
Page 12: Inspection, Maintenance, And Cleaning
Have it repaired by an authorized service technician. Keep all screws tight. Loose screws may damage the tool and cause personal injury. Make sure the Nose (19) is clear of all dirt or debris. SKU 91494 For technical questions, please call 1-800-444-3353. OPERATING INSTRUCTIONS FIGURE 4... -
Page 13: Parts List
NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 91494 For technical questions, please call 1-800-444-3353. PARTS LIST Part No. -
Page 14: Assembly Diagram
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 91494 For technical questions, please call 1-800-444-3353. Page 14...