Chicago Electric 91212 Assembly And Operating Instructions Manual
Auto-darkening welding helmet with ansi-approved lens
Hide thumbs
Also See for 91212:
- Set up and operating instructions manual (11 pages) ,
- Set up and operating instructions manual (11 pages) ,
- Assembly and operating instructions manual (9 pages)
Table of Contents
Advertisement
Quick Links
AUTO-DARKENING WELDING HELMET
with ANSI-Approved Lens
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual.
Aside from the slight differences noted in this manual, the warnings, operation
instructions, and maintenance procedures will remain the same.
Copyright
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INjURY OR BLINDNESS,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
2006 by Harbor Freight Tools
©
91212/ 91214
94336/ 94337
. All rights reserved. No portion of this manual
®
Manual revised 08/06
®
Advertisement
Table of Contents
Related Manuals for Chicago Electric 91212
Summary of Contents for Chicago Electric 91212
- Page 1 2006 by Harbor Freight Tools © or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 91212/ 91214 94336/ 94337 AND INSTRUCTIONS BEFORE USE.
-
Page 2: Specifications
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. - Page 3 Use of any other parts can render helmet ineffective, possibly causing eye damage, and will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 13. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
- Page 4 17. Use only at temperatures within the operating range for your model as stated on the specifications chart on page 2. Inhalation Hazard Welding Produces TOxIC FUMES and GASSES. Exposure to welding gasses can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer.
-
Page 5: Before First Use
The Auto-Darkening Welding Helmet needs to be charged prior to use and after extended storage. Leave the solar panel on the helmet facing the sun for at least 4 hours before first use. Remove the protective film from both sides of the front lens (if not already done). Follow the Before Each Use instructions below. - Page 6 Models 94336 & 94337 Sensitivity Adjustment Adjusts the amount of light the lens requires to respond and darken with. Models 91212 & 91214 Dark to Clear Delay Adjustment In FAST Position = .25-.35 Second In SLOW Position = .50-.80 Second...
-
Page 7: Troubleshooting
Irregular Darkening or Dimming a. Headband has been set unevenly on the two sides of the helmet (unequal distances from the eyes to the filter’s lens). b. Reset headband to reduce the difference in distances to filter, if necessary. Auto-Darkening Filter Does Not Darken Or Flickers a. -
Page 8: Parts List And Assembly Diagram
Parts List and Assembly Diagram IMPORTANT: Parts are not necessarily interchangeable. When ordering parts, make certain to specify which model they are for. Part Description Front Lens Cover Auto-Darkening Filter Cartridge* Shade Knob Inside Lens Cover Shell (Welding mask) Front Headband Adjustable Headband *Includes Delay and Sensitivity Dials/Switches NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as...