Provide barriers or shields as needed. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. SKU 93784 For technical questions, please call 1-800-444-3353. SPECIFICATIONS y t i ;...
Page 3
Maintain labels and nameplates on this tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear ANSI approved safety impact eye goggles and heavy work gloves when using this tool.
Page 4
They become very hot. When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number at the bottom of the page as soon as possible.
Page 5
View the Meter Display (D) and read the battery condition. Refer to the “Battery Condition Analysis” section on the next page. Release the Toggle Switch (C) and remove the Cable Clamps from the battery. SKU 93784 For technical questions, please call 1-800-444-3353. OPERATING INSTRUCTIONS...
Page 6
SKU 93784 For technical questions, please call 1-800-444-3353. Testing the Charging System Battery Condition Analysis When testing a 12 V battery, refer to this area of the gauge.
If needed, turn the black screw at the bottom center of the gauge to adjust the needle so that it points exactly at the zero while the unit is disconnected. The Battery Tester has no replaceable parts. SKU 93784 For technical questions, please call 1-800-444-3353. Testing the Starter...