HP Compaq nc4400 Quickspecs page 13

QuickSpecs
Memory
Up to 4096-MB* of 533-MHz or 667-MHz DDR2 SDRAM
Two DIMM slots
DIMM sizes supported: 256-MB, 512-MB, 1024-MB or 2048-MB
Standard Memory
Optional Memory
Upgrades
Up to
768-MB
1024-MB
1024-MB
1280-MB
1536-MB
2048-MB
4096-MB*
Memory Upgrades
256-MB (256-MB x 1)
512-MB (512-MB x 1 or 256-MB x 2)
1024-MB (1024-MB x 1 or 512-MB x 2)
2048-MB (2048-MB x 1 or 1024-MB x 2)
4096-MB* (2048-MB x 2)
Support for up to 4096-MB of memory is available (with the installation of optional DDR2 SDRAM memory
kits). Both memory slots are user accessible. Please refer to the Hardware and Software Guide for
installation procedures.
* Above 3-GB, all memory may not be available due to system resource requirements.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry
standard nature of some third-party memory modules, we strongly recommend using only HP branded
memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower
memory speed.
256-MB 533-MHz DDR2 SDRAM
512-MB 533-MHz DDR2 SDRAM
1024-MB 533-MHz DDR2 SDRAM
512-MB 667-MHz DDR2 SDRAM
1024-MB 667-MHz DDR2 SDRAM
2048-MB 667-MHz DDR2 SDRAM
DA - 12448 Worldwide — Version 14 — May 23, 2007
HP Compaq nc4400 Notebook PC
Slot 1
512-MB
1024-MB
512-MB
1024-MB
1024-MB
1024-MB
2048-MB
Slot 2
256-MB
Empty
512-MB
256-MB
512-MB
1024-MB
2048-MB
PE830A
PE831A
PE832A
EM993AA
EM994AA
EM995AA
Page 13