Speaker Assembly - HP 8510w Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the following components:
a.
Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. TouchPad (see
f. Display assembly (see
g. Top cover (see
Remove the speaker assembly:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the three Phillips PM2.5×4.0 screws (2) that secure the speaker assembly to the base
enclosure.
Battery on page 47).
Hard drive on page 51)
Optical drive on page
Keyboard on page 58)
Switch cover on page
TouchPad on page 70)
Display assembly on page
Top cover on page 84)
54)
75)
79)
Component replacement procedures
Spare part number
452225-001
87