Pc Card Assembly - HP Compaq 8710p Maintenance And Service Manual

13. Speaker assembly (see
14. System board (see
Remove the USB/audio board:
1. Remove the USB/audio board cables (1) from the clips (2) built into the base enclosure.
2. Remove the Torx T8M2.5×4.0 screw (3) that secures the USB/audio board to the base
enclosure.
3. Lift the left side of the USB/audio board (4) until the USB and audio connectors disengage from
the openings in the base enclosure.
4. Remove the USB/audio board and cables from the base enclosure.
Reverse this procedure to install the USB/audio board.

PC Card assembly

Description
PC Card assembly
Before removing the PC Card assembly, follow these steps:
1. Battery (see
2. Hard drive (see
3. Bluetooth module (see
4. Optical drive (see
5. Keyboard (see
6. TouchPad (see
7. Switch cover (see
94 Chapter 4 Removal and replacement procedures
Speaker assembly on page
System board on page
Battery on page 46)
Hard drive on page
Bluetooth module on page
Optical drive on page
Keyboard on page 62)
TouchPad on page 66)
Switch cover on page
87)
89)
50)
53)
60)
69)
Spare part number
450584-001