Page 1
Firmware Update Instruction Manual This manual explains the procedures for downloading the RICOH R10 firmware from the Ricoh website and updating the camera’s firmware. Perform the following operations to update the firmware. 1. Check the firmware version Caution Before updating, be sure to check the firmware version through the following method. If the installed firmware is the latest version, there is no need to update.
Page 2
• A dialog screen appears. Click [OK]. • The folder [R10 Update] is created, and the firmware is extracted to the folder [Firmware relX.XX (where X.XX is the version number)]. Check that [elaunch3] (firmware file), [elaunch4] (extension file), and [elaunch8] (adjusted value file) are inside the folder [Firmware relX.XX].
Page 3
Select [Yes], and press the ADJ./OK button. • The SD memory card is formatted. Caution If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in your computer before formatting the card.
For Windows When the copying of the firmware is completed, double-click the [Safely Remove Hardware] icon in the task bar. For Macintosh Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon has disappeared, proceed to Step 14. Caution If you skip the procedures in Step 10, the firmware copy may not be successful.
4. Update the firmware Making sure that the camera’s power is 6 (Playback) Button Mode dial turned off, switch the mode dial to SCENE. While pressing the ADJ./OK button !, hold down the 6 (Playback) button for 2- 3 seconds. •...