HP 2710p Specification page 22

QuickSpecs
Memory
667-MHz* DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 512 MB, 1024 MB, 2048 MB
Standard Memory
Optional Memory
Upgrades
Up to
1024 MB
1024 MB
1536 MB
2048 MB
4096 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Above 3-GB, all memory may not be available due to system resource
requirements.
Memory Upgrades
* System runs at a maximum of 533-MHz.
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both
memory slots.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM*
HP 2048-MB (DDR2 667 MHz) SODIMM*
DA - 12718 North America — Version 24 — August 20, 2008
Slot 1
1024 MB
512 MB
1024 MB
1024 MB
2048 MB
HP Compaq 2710p Notebook PC
Slot 2
Empty
512 MB
512 MB
1024 MB
2048 MB
EM993AA
EM994AA
EM995AA
Page 22