Average, Highest Value And Lowest Value For - Accu-Chek Compact Plus User Manual

If the time and date were not set at the time of testing, then the
i
memory location number is displayed instead of the time and
date.
Memory location number
If the memory contains both results that were saved together
with the time and date and results that were not saved with this
information, then you will see results shown together with their
time and date as well as results shown only with their memory
location number.
If you turn the meter off with the Test button, it shows you the
i
number of test strips remaining in the drum (see Chapter 2.3.2).
The meter turns off automatically if you have not pressed a but-
i
ton for 60 seconds.
106
Using the meter as an electronic notebook
5.3 Average, highest value and lowest value for 7, 14 and 30
days
The meter can display the average values of results from the last 7, 14
or 30 days. Also, you can request that the lowest and highest values be
displayed for these 3 periods. All results falling within the relevant
period are included in the calculation. The current day is always
included in the calculation. If more than 500 test results were saved
during this period, the calculation will be based on the last 500 test
results.
With the meter turned off, press the M button.
The meter turns on without advancing a test strip.
Following the display check (see Chapter 2.2.2), the most recently saved
result is displayed together with the time, date and
for memory.
Using the meter as an electronic notebook
5
. is short
107