Accu-Chek Compact Plus User Manual page 32

Setting alarm times
The procedure for setting the alarm time is the same for each alarm.
Alarm 1 is used below for illustrative purposes. The number
sequently and in the display stand for Alarms 1, 2 and 3.
The factory setting is 0:00 (24-hour format) or 12:00 am (12-hour
format). This time means that alarm 1 is turned off. Only when you set a
different alarm time is Alarm 1 turned on.
First the hour is set, and then the minutes.
The hour flashes at top left of the display.
24-hour
format
12-hour
format
62
Press the M button repeatedly, or press and hold it down, until the
required hour is displayed.
Press the S button to save the chosen setting.
and sub-
The minute setting comes next.
The minutes flash at top left of the display.
24-hour
format
12-hour
format
Press the M button repeatedly, or press and hold it down, until the
required minutes are displayed.
Press the S button to save the chosen setting.
Settings Settings
3
63