HP 2000-2a10nr User Manual page 62

Remove the hard drive:
1. Loosen the hard drive cover screw (1) (or screws depending on your model), and then lift up (2)
and remove the cover (3).
2. Disconnect the hard drive cable (1) from the system board.
3. Lift the hard drive (2) out of the hard drive bay.
NOTE:
bracket to access the hard drive itself.
4. Turn over the hard drive, then disconnect the hard drive cable (1) from the hard drive.
5. Pull the sides of the hard drive bracket (2) out and away from the hard drive.
52 Chapter 8 Maintaining your computer
After removing the hard drive from the computer, you must remove the hard drive
Meijer.com