Removing the service door
Remove the service door to access the memory module slot, hard drive, regulatory label, and other
components.
To remove the service door:
1.
Remove the battery (see
2.
With the battery bay toward you, slide the service door release latch (1) to the left, remove the
screw (if the optional screw is being used) (2), and then slide the release latch again (3) to
release the service door.
3.
Slide the service door toward the front of the computer (4) and lift (5) to remove the cover.
Inserting or removing the battery on page
46).
Using hard drives
61