Additional Information - HP Compaq 610 Quickspecs

QuickSpecs
Technical Specifications
Batteries
Additional
information:
DA - 13304 Worldwide — Version 7 — January 7, 2010
NOTE: System fan is usually off except when charging the battery
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater the 5ppm by weight
Cadmium greater than 10ppm by weight
The battery type and chemistry used in the product is:
CR2032 (coin cell), Li ion
6-cell high capacity Li ion battery (optional 8 cell available)
This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) directive – 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive – 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 98.4% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Paper / Cardboard – 765 g
Internal:
EPE-Expanded Polyethylene – 70 g
Polypropylene – 15 g
The EPE foam packaging material is made from 0% recycled content.
The corrugated paper packaging materials contains at least 70~80%
recycled content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Compaq 610 Notebook PC
Page 32