Clickpad Touchpad Button Board - HP 3105m Maintenance And Service Manual

5. Remove the service cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the power button board:
To remove the power button board, follow these steps:
1. Position the top cover upside down, with the front toward you.
2. Remove the screw (1) that secures the power button board to the top cover.
3. Lift up and remove the power button board (2).
Reverse this procedure to install the power button board.

ClickPad TouchPad button board

Description
ClickPad TouchPad button board (includes bracket and cable)
Before removing the ClickPad TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
ENWW
WLAN module on page
Hard drive on page 33).
Keyboard on page 43).
Top cover on page 45).
39).
Spare part number
636449-001
Component replacement procedures 47