Speakers
Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Service door (see
●
WLAN module (see
●
Top cover (see
●
USB board (see
●
Display assembly (see
●
System board (see
To remove the speakers:
1.
Remove the four Phillips PM2.5×4.0 screws (1) that secure the speakers to the computer.
2.
Remove the speaker cable from the clips built into the computer chassis (2).
Battery on page
49), and then remove the following components:
Service door on page
55)
WLAN module on page
Top cover/keyboard on page
USB board on page
78)
Display assembly on page
System board on page
58)
61)
70)
83)
Component replacement procedures 101
Spare part number
747135-001