Advertisement
Quick Links
zDP36N6hSS
(Natural Gas)
zDP36L6hSS
(Liquid Propane)
Dimensions and Clearances (in inches)
Professional ranges offer a number of choices in size and cooktop
configurations.
All Professional Ranges are factory set for natural or liquid propane
gas. The correct model should be ordered for the installation situation.
36" Natural Gas Model
ZDP36N6HSS–6 gas burners
36" Liquid Propane Gas Model
ZDP36L6HSS–6 gas burners
Note: Conversion kits (WB49X10132, Natural to LP and WB49X10133,
LP to Natural) are available if the wrong gas type was ordered. High
Altitude kit, WB49X10130 (for Natural and LP gas models), is also
available. The kits must be installed by a qualified service technician
at additional cost.
Installation Information
Before installing, consult installation instructions packed with product
or online at Monogram.com for current dimensional data.
A 36" or 42" wide professional vent hood with a minimum 600 CFM
is recommended for installation over this range.
35-1/4"
to
36-3/4"
28-1/4"
Clearances between range and side wall or combustible material must
be at least 12" on each side.
Specification Revised 3/08
130546
– GE Monogram 36" Dual Fuel Professional Range
with 6 Burners
22"
12"
1-1/2"
35-7/8"
Advance Planning
Refer to dimensional drawings for appropriate placement and
necessary clearances when planning the installation.
• Cabinetry cannot be installed directly above the range.
• Working areas adjacent to the range should have 18" minimum
clearance between countertop and cabinet bottom.
• Clearance between range and side wall or combustible material
must be at least 12" on each side.
If the range is installed in an island
• Allow 12" minimum clearance at the back to combustible materials.
• The vent hood blower should provide at least 600 CFM and up to
1200 CFM.
• Installation must conform with local codes. In the absence of local
codes, the range must comply with the National Fuel Gas Code,
ANSI Z223.1-1990.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
GE
appliance questions, visit our website at
®
GEAppliances.com or call GE Answer Center
service, 800.626.2000.
GE Profile
or
®
™
®
Advertisement
Related Manuals for GE Monogram ZDP36L6HSS
Summary of Contents for GE Monogram ZDP36L6HSS
-
Page 1: Advance Planning
Clearances between range and side wall or combustible material must be at least 12" on each side. Specification Revised 3/08 130546 – GE Monogram 36" Dual Fuel Professional Range with 6 Burners Advance Planning Refer to dimensional drawings for appropriate placement and necessary clearances when planning the installation. -
Page 2: Electrical Requirements
A regulator is required at the LP source to provide maximum of 14" water pressure to the range regulator. Specification Revised 3/08 130546 – GE Monogram 36" Dual Fuel Professional Range with 6 Burners Optional Backsplash Accessories The range requires a 12" minimum clearance to a vertical combustible surface at the rear. -
Page 3: Features And Benefits
• Self-clean oven racks – Porcelain-coated racks are designed to be left in the oven during the self-clean cycle for effortless cleaning • Halogen lighting – Illuminates your culinary work in progress • Model ZDP36N6HSS – Natural Gas, 6 burners • Model ZDP36L6HSS – Liquid Propane, 6 burners...