Table of Contents
Advertisement
Before a
The range must be completely cool in order to
set the self-clean cycle.
clean cycle
We recommend venting with an open window
or using a ventilation fan or hood during the
first self-clean cycle.
Remove all cookware and any aluminum foil
from the oven.
Oven
An interlock system has been designed so that
the self-clean cycle will not start until the shelf
shelf slide
slide assemblies have been removed.
assembly
The roller-assisted shelf supports are designed
to withstand standard baking temperatures.
They will not withstand the extreme
temperatures of self-cleaning.
To remove the slide assemblies:
1 Loosen the retaining screws on both sides of
2 Lift up slightly and pull the entire assembly
To replace the slide assemblies:
When self-cleaning is finished, and the oven has
cooled, replace the assemblies and retaining
screws.
1 Guide the rear of the shelf slide assembly into
2 Guide the top rear of the shelf slide assembly
3 Lift up the push rod so that it rests on the
4 Reattach the assembly securely to the oven
the oven.
out. Set aside.
the bottom rear bracket.
into the top "U"-shaped bracket.
ledge of the side support of the assembly.
with the retaining screw. Repeat for the other
side of the oven.
Self-Cleaning Oven
Stainless Steel Range
Remove the oven shelves and shelf slide
assembly.
Make sure the oven light bulb cover is in place
and the oven light is off.
Do not use commercial oven cleaners or oven
protectors in or near the self-cleaning oven.
Lift up and off
Retaining
screw
Bottom
Push up here
bracket
Pull the entire
assembly out.
U-Shaped
bracket
Push
rod
19
Advertisement
Table of Contents
