Accu-Chek COMPACT PLUS Owner's Booklet page 83

The test strip was bent or
removed during testing.
Remember to slide and
release
the test to turn the meter off
and allow the test strip to
release. Slide and release
again and a new test strip
advances.
Chapter 5: Maintenance and Troubleshooting
at the end of
to turn on the meter
• The test strip is stuck in
• The meter was turned off
81
ACCU-CHEK Customer Care Service Center 1-800-858-8072
the test strip slot or the test
drum does not rotate. Pull
the test strip out of the meter
and discard it. Then, take the
test drum out and reinsert it.
Remember the 90-day use-
by counter in the meter is
no longer correct. The drum
symbol flashes until you
install a new test drum.
and on again, but the test
strip is still in the meter.
Hold the meter straight up
and down and let the test
strip drop out, or take it out
manually even if it takes a
small amount of force.