BEEPER
Setting the Year, Time, and Date
Your new meter comes with the batteries already installed and a preset time and date. You may need
to change the time to your time zone. Setting the time and date is important if you use the meter's
memory or download your stored results to a computer.
1. With the meter off, press
mode. The meter turns on and briefly shows
all of the display symbols. Next, the beeper
symbol is displayed with your current selection
flashing.
Chapter 1: Understanding Your New System
BRIGHTNESS
S
S
to enter the set
You are here
TIME / DATE
TEST REMINDERS
S
S
2. Press
twice to reach the year with the last
two numbers of the year flashing. Press
change the year. Press
14
ACCU-CHEK Customer Care Service Center 1-800-858-8072
HYPO
M
M
to
S
S
to set your selection.