Top Cover - HP Compaq 6715b Maintenance And Service Manual

Top cover

Description
Top cover for use with HP Compaq 6715b and 6710b computer models (includes TouchPad and
cable and fingerprint reader)
Top cover for use with HP Compaq 6715s and 6710s computer models (includes TouchPad and
cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/WLAN module compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Switch cover (see
f. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the thirteen Torx T8M2.5×9.0 screws (1) that secure the top cover to the computer.
Battery on page 52).
Hard drive on page 56)
Optical drive on page
Keyboard on page 68)
Switch cover on page
Display assembly on page
Expansion memory module on page
66)
74)
80)
Component replacement procedures
Spare part number
443822-001
443823-001
60)
85