Standard Memory; Memory Upgrades - HP COMPAQ 6510b Specifications

QuickSpecs
Memory
Support for up to 4096 MB of 667-MHz DDR2 SDRAM
Two DIMM slots
DIMM sizes supported: 512 MB, 1024 MB, and 2048 MB

Standard Memory

Optional Memory
Upgrades
Up to
1024 MB
1024 MB
1536 MB
2048 MB
4096 MB

Memory Upgrades

512 MB (512 MB x 1)
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Support for up to 4096 MB of memory is available (with the installation of optional DDR2 SDRAM
memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same size and
speed in both memory slots.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard
nature of some third-party memory modules, we strongly recommend using only HP branded memory
modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory
speed. Full availability of 4 GB of memory requires Windows Vista Business 64-bit or Linux. With
Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration,
so that above 3 GB all memory may not be available due to system resource requirements.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM
HP 2048-MB (DDR2 667 MHz) SODIMM
DA - 12684 Worldwide QuickSpecs — Version 12 — 3.13.2008
HP Compaq 6510b Notebook PC
Slot 1
1024 MB
512 MB
1024 MB
1024 MB
2048 MB
Slot 2
Empty
512 MB
512 MB
1024 MB
2048 MB
EM993AA
EM994AA
EM995AA
Page 13