Importing And Exporting Configuration Settings; Boot Log - GE 30 User Manual

Table 13: Hard Drives screen commands and options
Commands and options
Auto Delete
Overwrite
Disk Drives
Network Attached Storages
Total Storage
Free Capacity
[1] The Repair option under Disk Drives fixes file system errors..

Importing and exporting configuration settings

Use the Configuration screen to import or export configuration settings. Click Export
Config to export the TVR 30's configuration settings into a configuration file. Click
Import Config to import configuration settings from a file. This screen also lets you
restore the TVR 30 settings to factory defaults.

Boot log

The Boot Log screen displays your device's information that is generated each time
your device boots up. A boot log helps you diagnose your system in case of problems.
Click Archive to save the boot log into a backup device.
Table 14 below describes the codes used in the system's boot log.
Table 14: Boot log code descriptions
Code Value
Shutdown AppExit
Shutdown PwrOff
Shutdown Reboot
Boot PwrOn
Boot PwtFail
Boot Reboot
TruVision DVR 30 User Manual
Descriptions
Selects the number of days when the system deletes data
automatically
Select On to automatically overwrite data when the hard drive reaches
its capacity
Displays the Disk Drive screen. This screen lets you add, remove, format,
and repair disk drives installed in your device. [1]
Displays the Network Attached Storages screen
Displays the total hard drive space
Displays the amount of available space in the hard drive
Description
Use <ESC> + <ENTER> + <CH1> to terminate the AP
PwrOff
From menu reboot
Powered On
Booted up but DVR was unexpectedly powered off
Powered on via reboot
Chapter 7: System settings
71