Rs-485 Settings; Rs-232 Settings; Hard Drive Settings - GE 30 User Manual

Chapter 7: System settings
Select Live/PB in the Audio Output box to play audio during live or playback modes.
Select On in the Key Beep box to allow front panel buttons to beep when pressed.
Specifying a remote ID for the device lets you control up to 16 DVRs using a single
remote control. See "Controlling multiple DVRs with one remote control" on page 17
for more information.

RS-485 settings

Use the RS-485 Setting screen to define the settings for the RS-485 ports. Settings
defined in this screen must match the PTZ settings of the camera connected to the
RS-485 port. To access the RS-485 Setting screen, click RS-485 Setting on the System
screen.

RS-232 settings

Use the Device Setting screen to define settings for the serial port. This port is used to
connect point-of-sale (POS) devices to the TVR 30. To access the RS-232 Setting
screen, click RS-232 Setting on the System screen.

Hard drive settings

Use the Hard Drives screen to define settings for the hard drive. Table 13 on page 71
describes the commands and options available on this screen. To access the Hard
Drives screen, click Hard Drives on the System menu.
Figure 36: Hard Drives screen
70 TruVision DVR 30 User Manual