Operating Modes; Controlling Multiple Dvrs With One Remote Control - GE 30 User Manual

Item Name
5 Numeric buttons
6 Menu
7 Playback
To place batteries into the IR remote control:
1. Remove the battery cover.
2. Insert the batteries (AAA). Make sure that the positive and negative poles are
correctly placed.
3. Replace the battery cover.
To connect the remote control to the TVR 30:
1. Turn on the TVR 30 and wait for live video to appear.
2. On the remote control, press the DVR ID button, and then press the 1 button.
Note: The numeric button depends on the remote ID assigned to the TVR 30. The
remote ID assigned is 1 by default. See "Controlling multiple DVRs with one
remote control" below for more information.
3. The remote control is now operational.

Controlling multiple DVRs with one remote control

You can control up to 16 DVRs with one remote control. Each DVR must have a
unique remote ID assigned. To connect the remote control to a DVR, press the DVR ID
button on the remote control, and then press the numeric button with the desired
remote ID. For more information on assigning a remote ID to a DVR, see "Audio and
remote" on page 69.

Operating modes

Table 7 below describes the various operating modes for the TVR 30.
Table 7: TVR 30 operating modes
Mode Description
Live Displays live video from a specific camera.
Sequence Displays live video in a programmed sequence of cameras.
TruVision DVR 30 User Manual
Description
In live mode, display the corresponding camera. In edit mode, enter
numeric characters.
Display the main menu.
Control video playback speed.
Chapter 3: Operating instructions
17