Buttons And Ports - NETGEAR WN3500RP User Manual

Buttons and Ports

The following figure shows the buttons and ports on the extender.
Power
On/Of
WPS
Figure 4. Extender side and bottom panels.
The Power On/Off button and WPS button are on the side panel.
Power On/Off button. Use this button to turn on and off the extender.
•
WPS button. Use this button to connect the extender to your existing WiFi network. For
•
more information, see
The ports and Reset factory settings button are on the bottom panel.
Audio port. Use the Audio port to connect the extender to your speaker.
•
USB port. Use the USB port to connect the extender to a printer.
•
Reset factory settings button. To reset the extender to its original factory settings,
•
insert a paper clip into the reset hole and hold it until the Power LED flashes.
Ethernet port. Use the Ethernet port on the extender to connect an Ethernet-enabled
•
device wirelessly to your network.
Universal Dual Band WiFi Extender – Desktop/Wallplug
Add a WPS Client to the Extender WiFi Network
Getting Started
Audio port
USB port
Reset Factory Defaults
Ethernet port
9
on page 20.