Add A Wps Client To The Extender Wifi Network; Setup Menu; Connect The Extender To An Existing Wireless Network - NETGEAR WN3500RP User Manual

Add a WPS Client to the Extender WiFi Network

WPS (Wi-Fi Protected Setup) lets you join a secure WiFi network without typing its password.
Instead, you use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2
wireless security.
You cannot use the Push 'N' Connect WPS button on the extender
Note:
to connect the extender to your wireless network. The WPS button
on the extender can be used only to connect a computer to the
extender.

To join the extender's network using WPS:
Select Add WPS Client. The following screen displays:
1.
Select a radio button.
2.
Push Button (recommended). Either click the
•
button on the front of the extender.
PIN Number. Select the radio button, and a PIN displays.
•
The extender tries to find the wireless client (the computer) that is attempting to join the
network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it
tries for 4 minutes.
Go to your wireless computer. Use its WPS software to try to connect to the extender.
3.

Setup Menu

Connect the Extender to an Existing Wireless Network

You can wirelessly connect the extender to your home network.
Universal Dual Band WiFi Extender – Desktop/Wallplug
Extender Network Settings
button or press the
20
WPS