Install The Extender - NETGEAR WN3500RP User Manual


To cable a computer to the extender:
Locate the ports on the extender.
1.
Use an Ethernet cable or USB cable to connect your computer the extender.
2.
Plug in the AC adapter or attach the stand and power adapter cord to the extender, and
3.
then plug it into an electrical outlet.
If you want to log in to the extender, see

To use the extender as a one-port WiFi adapter:
Make sure that the extender is connected to your existing wireless WiFi network.
1
Plug the Ethernet cable from your Ethernet-enabled device (connected TV, Blu-ray player,
2
gaming console) to the Ethernet port of the extender.

Install the Extender


To install the extender:
Either connect the AC plug, or attach the stand and the power adapter cord.
1
Find a place to install the extender that is about halfway between the router and the
2
computer or wireless device that is outside of the range of the router.
If you have to use a different location, see
Power up the extender.
3
If you connected the AC plug to the extender, plug it directly into an electrical outlet.
•
If you attached the stand and power adapter, plug the power adapter into an electrical
•
outlet.
Universal Dual Band WiFi Extender – Desktop/Wallplug
Getting Started
USB port
Ethernet port
Log In to the Extender
Position the Extender
12
on page 17.
on page 14.