Anti-Tip Device; Lnsta; Installation Instructions - GE JBP22GR Use And Care & Installation Manual

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN
Read these instructions completely
and carefilly.
IMPORTANT: Save these instructions for
the local electrical inspector's use.
IMPORTANT: OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
instructions with the appliance after
installation is completed.
NOTE TO CONSUMER: Keep this Use and
Care Guide and Installation Instructions for
future use.
grounded.
TOOLS YOU WILL NEED
Large blade screwdriver
Channel lock pliers or small ratchet wrench with
ELECTRICAL REQUIREMENTS
CAUTION, FOR PERSONAL SAF131Y:
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.
REMOVE HOUSE FUSE OR OPEN
CIRCUIT BREAKER BEFORE BEGINNING
INSTALLATION.
This appliance must be supplied with the proper
voltage and tiequency, and connected to an
individual, properly grounded branch circuit,
protected by a circuit breaker or time delay fuse, as
noted on the rating plate.
Wiring must conform to National Electric Codes.
above specifications, it is recommended that a
licensed electrician install an approved outlet.
Because range terminals are not accessible after
range is in position, flexible service conduit or cord
must be used.
26
STEP 1
1%" spacing is recommended from the range to
adjacent vertical walls above cooktop surface.
Allow 30" minimum clearance between surface
units and bottom of unprotected wood or metal
top cabinet, and 15" minimum between
countertop and adjacent cabinet bottom.
To eliminate the risk of burns or fire by reaching
over heated surface units, cabinet storage space
above the surface units should be avoided. If
cabinet storage is to be provided, the risk can be
reduced by installing a range hood that projects
horizontally a min. of 5" beyond the bottom of
the cabinets.
NOT LESS THAN
WIDTH OF RANGE
30"
MIN.
MIN.
//
I I I
MIN.
INSTALL
OUTLET BOX
ON EITHER
SIDE OF Q
LOCATE
WITHIN EITHER
SHADED AREA