Using The Surface Units - GE JB690 Owner's Manual

Using the surface units.

Throughout this manual, features and appearance may vary from your model.
Be sure you turn the control knob to OFF
when you finish cooking.
BURNER
9"
SIZE
6" 12"
OFF
How to Set
Push the knob in and turn in either direction
to the setting you want.
At both OFF and HI the control clicks into
position. You may hear slight clicking sounds
during cooking, indicating the control is
keeping the power level you set.
Dual Surface Unit
(on some models)
The dual surface unit has 2 cooking sizes to select
from so you can match the size of the unit to the
size of the cookware you are using.
To use the small surface unit, push in
the SMALL BURNER portion of the switch
above the control knob.
To use the large surface unit, push in
the LARGE BURNER portion of the switch
above the control knob.
Dual Surface Unit Control Knob
The dual surface unit has 2 cooking sizes to select from
so you can match the size of the unit to the size of the
cookware you are using.
To use the small surface unit, turn the control
knob to the SMALL BURNER settings.
To use the large surface unit, turn the control
knob to the LARGE BURNER settings.
Tri-Ring Surface Element
The rear center surface element offers 3 cooking areas
to match the size of the cookware you
are using.
To use the largest cooking area, push in and
turn the SELECTOR knob to 12 . Push and
turn the control knob to the desired setting.
To use the medium cooking area, press and
turn the SELECTOR knob to 9 .
A HOT COOKTOP indicator light will glow
when any radiant element is turned on, and
will remain on until the surface is cooled to
approximately 150°F.
Indicator light will:
come on when the unit is turned on or hot to the
touch.
stay on even after the unit is turned off.
glow until the unit is cooled to approximately 150°F .
(on some models)
(on some models)
Push down and turn the control knob to the
desired setting.
To use the smallest cooking area, turn the
SELECTOR knob to 6 . Push and turn the
control knob to the desired setting. This will
activate only the smallest inside heating area.
ge.com
7