GE Gas Ranges Owner's Manual page 7

SURFACE COOKING
• Always turn the surface burners to OFF before
• Carefully watch foods being fried at a high
• Foods for frying should be as dry as possible.
• Use the least possible amount of fat for
• Use a deep fat thermometer whenever possible
• Never try to move a pan of hot fat, especially
• When using glass cookware, make sure it is
• If a combination of oils or fats will be used in
• Do not leave any items on the cooktop. The
• Use proper pan size—avoid pans that are
• Keep all plastics away from the top burners.
• Do not leave plastic items on the cooktop—
removing cookware.
flame setting.
Frost on frozen foods or moisture on fresh
foods can cause hot fat to bubble up and over
the sides of the pan.
effective shallow or deep fat frying. Filling the
pan too full of fat can cause spillovers when
food is added.
to prevent overheating fat beyond the smoking
point.
a deep fat fryer. Wait until the fat is cool.
designed for top-of-range cooking.
frying, stir together before heating or as fats
melt slowly.
hot air from the vent may ignite flammable
items and will increase pressure in closed
containers, which may cause them to burst.
unstable or easily tipped. Select cookware
having flat bottoms large enough to properly
contain food and avoid boilovers and spillovers
and large enough to cover burner grate. This
will both save cleaning time and prevent
hazardous accumulations of food, since heavy
spattering or spillovers left on the range can
ignite. Use pans with handles that can be easily
grasped and remain cool.
they may melt if left too close to the vent.
• To avoid the possibility of a burn, always be
certain that the controls for all burners are at
the OFF position and all grates are cool before
attempting to remove them.
• When flaming foods under the hood, turn
the fan on.
• Grease is flammable. Let hot grease cool
before attempting to handle it. Avoid letting
grease deposits collect in the container under
the cooktop burners, the grille or the griddle.
Clean these areas after each use or boilover.
• For proper lighting and performance of the
cooktop burners, keep the burner ports clean.
It may be necessary to clean these when there
is a boilover or when the burner does not light,
even though the electronic ignitors click.
• After cleaning, it is important to make sure
the outer cap/burner port is properly aligned
with the burner base. Incorrect alignment will
produce poor burner performance. Never
operate the burner without all burner parts
in place.
• Clean the cooktop with caution. Avoid steam
burns; do not use a wet sponge or cloth to
clean the cooktop while it is hot. Some
cleaners produce noxious fumes if applied to a
hot surface. Follow manufacturer's directions.
• Do not use the grille for cooking excessively
fatty meats or products which promote flare-up.
• DO NOT use cookware on the grille.
• If range is located near a window, do not hang
long curtains that could blow over the surface
burners and create a fire hazard.
• Be sure all the range and/or cooktop controls
are turned off and the appliance is cool before
using any type of aerosol cleaner or cooking
spray on or around the appliance. The
chemical that produces the spraying action
could, in the presence of heat, ignite or cause
metal parts to corrode.
7