Griddle; Care And Cleaning Of The Range - GE CGS980 Owner's Manual & Installation Instructions

Care and cleaning of the range.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
Front right burner
Burner cap
Burner head
Electrode
Burner base
Make sure the hole in the burner
head is positioned over the electrode
and that the burner head is fully
inserted inside the burner base.
A small gap between the base and
head is normal.
Front left burner, back right burner
and back left burner
Burner cap
Burner head
Use a sewing
Stability
needle or
chamber
twist-tie to
unclog the
small hole in
the burner
head.
Burner base
Electrode
Make sure the slot in the burner head
is positioned over the electrode.
32
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device
is re-engaged properly when the range is replaced. Failure to take this precaution could
result in tipping of the range and cause injury.
Sealed Burner Assemblies
Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy to
clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
CAUTION:
cooktop without all burner parts and grates in place.
Electrode
Front left, back right
and back left burner
The electrode of the spark igniter is
Center exposed when the burner head is

griddle

removed. When one burner is turned
to LITE, all the burners spark. Do not
Burner head
attempt to disassemble or clean
and cap
around any burner while another
assembly
burner is on. An electric shock may
Electrode
result, which could cause you to knock
over hot cookware.
Do not operate the
Burner head
Electrode
Burner base
Front right burner