Gas/Control Lockout - GE CGS980 Owner's Manual & Installation Instructions

Gas/Control Lockout

(on some models)
Your control will allow you to lock out the surface
burners, oven burners and control panel so they
cannot be activated.
To lock/unlock the controls:
Turn all surface burners off.
Touch and hold the GAS/CONTROL
LOCKOUT pad for 3 seconds until the
display shows LOC .
To unlock the control, touch and hold
the GAS/CONTROL LOCKOUT pad for
3 seconds until LOC disappears from
the display.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is the
choice you want, touch the START
pad.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after the
cooking function is finished.
This feature can only be used when timed
cooking.
To activate this feature, follow the steps
below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show LOC .
s
The control lock-out mode affects all controls. No
controls will work when this feature is activated.
s
The adjustment will be retained in memory after
a power failure.
Touch the CLOCK pad again to change
to the 24-hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show OFF.
If this is the choice you want, touch the
START pad.
NOTE: If the clock is in the black-out mode, you will
not be able to use the Delay Start function.
Touch the COOKING TIME pad. The
display will show Hld OFF.
Touch the COOKING TIME pad again
to activate the feature. The display will
show Hld ON.
Touch the START pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
ge.com
25