Control Panel - GE 4164D2966P234 Use And Care & Installation Manual

Control Panel and Knobs
.
Clean up any spills or spatters with a damp cloth.
Remove heavier soil with warm, soapy water.
Clean the control panel with mild liquid dish
detergent and a soft cloth. Rub the control panel
lightly.
CAUTION: Do not use abrasives of any kind on the
control panel. The lettering on models with touch
pads is sensitive to abrasives and pressure.
The control knobs may be removed for easier
cleaning. To remove a knob, pull it straight off the
stem. Wash the knobs in soap and water but do
not soak.
Oven Vent
The oven is vented through an opening at the rear of
the cooktop. Never cover the opening with aluminum
Oven Vent
foil or any other material. This would prevent the
oven vent from working properly.
Metal Parts
Do not use steel wool, abrasives, ammonia or
commercial oven cleaners. To safely clean surfaces;
wash, rinse and then dry with a soft cloth.
Painted Surfaces
Painted surfaces include the sides, the control panel
and the drawer or kick panel front. Clean these with
soap and water or a vinegar and water solution.
Do not use commercial oven cleaners, cleansing
powders, steel wool or harsh abrasives on any
painted surface.
Glass Window
To clean the outside glass finish, use a glass cleaner.
Rinse and polish with a dry cloth.
(continued next page)
31