GE 164D3333P072 Owner's Manual page 31

Problem
Oven temperature too
hot or too cold
Clock and timer do
not work
Oven will not self-clean
Oven starts a self-clean
cycle when you wanted
to bake, roast or broil
"Crackling" or
"popping" sound
Excessive smoking
Oven door will
not unlock
Oven not clean after a
clean cycle
CLEAN light flashes
Possible Causes
Oven thermostat
needs adjustment.
Plug on range is not completely
inserted in the electrical outlet.
A fuse in your home may be
may be blown or the circuit
breaker tripped.
Oven controls improperly set.
The oven temperature is too
high to set a self-clean operation.
Oven controls improperly set.
Oven door is not in the
locked position.
Oven door locked during
cooking.
This is the sound of the metal
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive soil.
Oven too hot.
Oven controls not properly set.
Oven was heavily soiled.
Oven controls not properly set. •Move the door latch handle to the right before
What To Do
•See the Adjust the oven thermostat—Do it yourself!
section.
• Make sure electrical plug is plugged into a live, properly
grounded outlet.
• Replace fuse or reset circuit breaker.
•See the Using the clock and timer section.
• Allow the range to cool to room temperature and
reset the controls.
• Make sure you turn the control knob all the way to the
CLEAN position.
•Make sure you move the door latch handle all the
way to the right.
•Turn the Oven Temperature knob to OFF. Allow the
oven to cool. Never force the door latch handle.
•This is normal.
•Turn the Oven Temperature knob to OFF. Open the
windows to rid the room of smoke. Wait until the
CLEAN light goes off. Wipe up the excess soil and
reset the clean cycle.
•Allow the oven to cool below locking temperature.
• See Using the self-cleaning oven section.
•Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
setting the OvenTemperature knob to CLEAN.
31