Oven Bottom - GE 164D2966P118 Use And Care Manual

movable Oven Bottom
The oven bottom can be removed to make
cleaning easier.
1. Grasp the oven bottom at finger slots on each side.
2. Lift front edge of the oven bottom enough to raise
the front frame.
To replace the oven bottom:
into slots in the rear wall of the oven.
2. Grasp the oven bottom at finger slots and push it
front frame.
3. Fit the front tabs into slots in front frame.
The oven bottom has a porcelain enamel finish.
To make cleaning easier, protect the oven bottom
important when baking a fruit pie or other foods with
pitting and damage to the porcelain enamel surface,
To protect the oven bottom surface, place a
piece of aluminum foil slightly larger than the baking
dish on the shelf below to catch any boilovers. It
should not completely cover the shelf as this would
cause uneven heat in the oven. Aluminum foil should
not be placed on the oven bottom.
Painted Surfaces
Painted surfaces include the control panel and drawer
front. Clean these with soap and water or a vinegar
and water solution. Do not use commercial oven
cleaners, cleansing powders, steel wool or harsh
abrasives on any painted surface.
If a spillover does occur on the oven bottom,
allow the oven to cool first. Remove the oven bottom
continuous cleaning oven coating.
Frequent wipings with mild soap and water
(particularly after cooking meat) will prolong the
time between major cleanings. Rinse thoroughly. Soap
For heavy soil, use a mild abrasive cleaner and
Use of rubber gloves is recommended. Wipe or rub
lightly on stubborn spots. A commercial oven cleaner
may also be used, following package directions.
Finger
slot
23