GE 164 D2966P073 Use And Care Manual page 27

H to Set Delay Start of Cleaning
OW
2. Turn the Oven Temperature Control knob to
4. Press the HOUR and L41N. pads to set the
time of day you want cleaning to start. The
Self-Clean Cycle will automatically begin
time of day.
For example: Let's say it is 7:00 and you want the
oven to begin self-cleaning at 9:00 after you re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and 20 minutes is preferred.
2. Slide the latch handle to the
it w ill go.
Never force the latch
handle. Forcin~ the
handle will damage the
door lock mechanism.
(on some models)
3. Turn the Oven Temperature knob to the AUTO
SELF CLEAN position.
5. Press the HOUR pad until 9:()() appears in
A
HOUR
6. When the LATCH DOOR light flashes, slide the
latch handle to the left as far as it will go, turn the
Oven Temperature knob to OFF and open the door.
Never force the latch handle. Wait until the LATCH
DOOR light flashes and the latch slides easily.
Forcing the latch handle may damage the door lock.
the display. The timer is now' set to start
cleaning in 2 hours. at 9:00.
The Self-C'lean Cycle will be set to
automatically begin at 9:00 and finish
at 1 :20.
Both the OVEN ON liszht and the
LATCH DOOR light ~ill flash when
the Clean Time is finished.