Using The Clock And Timer - GE JB940 Owner's Manual

Using the clock and timer.

Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59 minutes.
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
To Set the Clock:
Press the CLOCK pad.
1
Press the number pads.
2
Press the START pad.
3
To Set the Timer:
Press the KITCHEN TIMER ON/OFF pad.
1
Press the number pads until the amount of time
2
you want shows in the display. For example, to set
2 hours and 45 minutes, touch 2, 4 and 5 in that
order. If you make a mistake press the KITCHEN
TIMER ON/OFF pad and begin again.
Press the START pad.
3
When the time is up, the oven control signals until
4
you press the KITCHEN TIMER ON/OFF pad.
To Reset the Timer:
If the display is still showing the time remaining, you
may change it by pressing the KITCHEN TIMER ON/OFF
pad, then press the number pads until the time you
want appears in the display.
If the remaining time is not in the display (clock, delay
start or cooking time are in the display), recall the
remaining time by pressing the KITCHEN TIMER ON/OFF
pad and then pressing the number pads to enter the
new time you want.
To Cancel the Timer:
Press the KITCHEN TIMER ON/OFF pad twice.
25