Advertisement
EURODESK
SX2442
SIXTEEN MONO
channels, each
with balanced
XLR in with
XENYX mic
preamp and
phantom power
for condenser
mics
¼" TRS
balanced/
unbalanced
input
Insert I/O
for signal
processing
on individual
channels (pre-
fader, pre-EQ
and pre-aux
send)
LOW CUT filter (mono
channels) eliminates
unwanted infrasonics
Semi-parametric
MID EQ is
sweepable from
100Hz to 8Khz
AUX 1 & 2 level
controls with
PRE/post switch
FX1 and FX2
inject built-in
FX into the
channel or
can be used
to control an
FX effects unit
MUTE switch
(with bright
LED) also
mutes aux
buses set to
post-fader
SOLO routes
the subgroup
signal to the
solo bus (Solo
In Place) or PFL
bus (Pre Fader
Listen)
Silky-smooth
60 mm faders
on all channels
and buses
Page 6 of 8
The Stereo
FX RETURN
inputs return
effect signals
from external
effects
processors
EIGHT LINE IN-
ONLY CHANNELS.
Left and right
balanced/
unbalanced line
level ¼" TRS inputs
(stereo channels
17-18, 19-20; dual
mono channels
21/22 & 23/24
TRIM control
adjusts input
gain via Level
Set LED
12kHz
shelving
HIGH EQ
80 Hz
shelving
LOW EQ
PAN control
sets position
of the channel
signal in the
stereo mix
Channel
CLIP LED
Routing
switches for
assigning
channel to
MAIN or
Subgroups
Advertisement
